Which bios driver to download

Contact support. Characters remaining: We appreciate all feedback, but cannot reply or give product support. Please do not enter contact information.

If you require a response, contact support. Skip To Main Content. Safari Chrome Edge Firefox. Support Navigation Support. Close Window. Plug a USB flash drive into your computer. Copy the BIOS file onto the flash drive. You need to leave the flash drive plugged into your computer for the duration of the update process.

Access the BIOS page. Back up your BIOS if possible. If you see a "Backup" or "Save" option on the BIOS' main screen or if you see a Backup tab at the top of the screen , select it and follow any on-screen instructions.

You may instead be prompted to back up your BIOS once you initiate the backup process. Not all BIOS pages allow you to back up their settings. Enable and use your BIOS update tool. In many cases, you'll select the Boot tab, ensure that your USB flash drive shows up, enable any backup or "Flash" options in the menu, and then select the Start Flash option from the Advanced tab.

This is common on Dell computers. Allow your computer's BIOS to update. This process can take a few minutes to over an hour depending on your computer and the depth of the BIOS update. Once your BIOS is finished updating, your computer should restart itself, though you may be prompted to confirm this decision.

Do not turn off your computer while the BIOS is updating. Doing so can cause the BIOS to become corrupted, meaning that your computer will be unable to start, complete the BIOS installation, or otherwise run at all.

Not Helpful 1 Helpful If the power goes out while you are updating the BIOS and you don't have a battery backup, this might make it difficult or impossible to boot your computer. However, if you can accept the small risk involved, updating the BIOS on modern devices is not particularly dangerous or difficult.

Not Helpful 2 Helpful You will need to press a certain key or key combination as your computer boots up. This key varies between computers, but usually your boot screen the screen before the OS loads will tell you which key to press, or you can look it up in the manual for your computer or motherboard. Not Helpful 3 Helpful 4.

Not Helpful 5 Helpful 3. While there are a number of companies who sell "current drivers," scan for outdated drivers, etc. They are free and, I presume, current. Not Helpful 4 Helpful I have a Dell Inspiration laptop with Windows 10 software. I bought it last month and due to its feature of auto updating apps, it is now asking permission for BIOS update. Do I need to update it? Don't fix what's not broken. If your BIOS is working just fine, there's really no need to update it unless the update could potentially have a fix for something that could benefit you.

Not Helpful 5 Helpful I have a Toshiba satellite c and for about two months now it displays: "Reboot and select proper device or insert boot media in selected boot device and press a key". I have installed a new operating system but am still getting the message. Sometimes it works but even then the A.

C cable needs to be blocked in for about 10 minutes for it to heat up. Can you help? Chances are, your computer's bootloader the program that the BIOS invokes on bootable drives to load your operating system is broken or corrupt. That or your BIOS cannot find the bootloader in the first place. There should probably be a section called "Boot Override". Look for your operating system. Windows 10 and possibly Windows 8 show up as "Windows Boot Manager".

Then, highlight your operating system and press enter. This might be different for you, however, so bear that in mind first. Not Helpful 3 Helpful Not Helpful 8 Helpful But you should back your existing BIOS up first, just in case.

There's probably a 0. Please consider upgrading to the latest version of your browser by clicking one of the following links. Article ID This method can't be used for software applications or firmware updates. For download files names ending in. EXE or. MSI: Double-click the filename after downloading to launch the installer. For any download with a ZIP file: double-click the filename.

Some downloads have specific installation instructions so be sure to read the download description, readme, or release notes. Contact support.